Product Description

The MF Fire Nova C Reduced Clearance Kit lets you place a Nova C wood stove much closer to combustible walls — down to a 7.5" backwall-to-unit clearance with double-wall connector pipe, per MF Fire. If your room layout doesn't have space to float a stove several feet off the wall, this kit is usually the difference between a workable install and no install at all.

Key Features

  • Tight rear clearance: per MF Fire, backwall-to-unit drops to 7.5" and sidewall-to-unit to 20", with double-wall connector pipe.
  • Two engineered parts: the Nova Series pipe shield (0364-000-C) and the Nova C-specific N92 rear air duct, per the MF Fire RCK manual.
  • Works across configurations: fits the Nova C freestanding, on the Tower base, or on the Bench.
  • Straightforward installation: the pipe shield centers behind the connector pipe; the air duct hangs from the two rear air-duct bolts.
  • Reclaims floor space: pulling the stove toward the wall can free a surprising amount of room in a small living area or cabin.

Specifications

SKU MF02-RCK
Compatibility MF Fire Nova C — freestanding, Tower, and Bench configurations (see the Nova 2X kit for the larger stove)
Contents Nova Series pipe shield (0364-000-C) + N92 rear air duct, per the MF Fire RCK manual
Resulting clearances Backwall-to-unit 7.5", sidewall-to-unit 20", with double-wall connector pipe, per MF Fire
Requires Double-wall connector pipe (not included)
Not included Stove, connector pipe, chimney components
Warranty MF Fire limited warranty; accessories carry shorter terms than the stove

Clearances Before and After

Without this kit, the Nova C's standard clearances (listed in the stove manual) push the unit well out into the room. With the kit installed and double-wall connector pipe, MF Fire lists backwall-to-unit at 7.5" and sidewall-to-unit at 20". Connector pipe clearances differ from unit clearances, so check both lines for your layout — the full table is in the MF Fire Reduced Clearance Kit manual. Single-wall connector pipe does not qualify: this kit requires double-wall connector pipe to achieve the reduced numbers.

Warranty & Support

OffGrid Horizon is a family-owned, authorized MF Fire dealer. This kit is covered by the MF Fire limited warranty (accessories carry shorter terms than the stove itself). Sketch your room and call us at (302) 496-3554 — we'll tell you honestly whether the numbers work before you order anything.

Frequently Asked Questions

Can I use single-wall stove pipe with this kit?

No. The reduced clearances require double-wall connector pipe. With single-wall pipe, the standard clearances in the stove manual apply.

Does it work with a Tower base or Bench?

Yes — the kit fits freestanding, Tower, and Bench configurations of the Nova C.

How hard is it to install?

It's two parts: the pipe shield centers behind the connector pipe and the N92 air duct hangs from the two rear air-duct bolts on the stove. Most installers handle it during the stove install; follow the RCK manual.

Does this kit fit the Nova 2X?

No — the Nova 2X uses its own kit with the N93 air duct: see the Nova 2X Reduced Clearance Kit.

Fighting for floor space in a small room? Call (302) 496-3554 or browse the full MF Fire collection.

Customers also bought

    • FREE SHIPPING IN USA

      Free shipping with every order

    • SATISFACTION GUARANTEED

      If your order arrives defective or fails to

      function properly, you will receive a full 100% refund!

    • PREMIUM CUSTOMER SUPPORT

      Connect with us through email, or

      phone, and we will address any questions you may have!

    • SECURE ENCRYPTED PAYMENTS

      We utilize advanced encryption to

      ensure there is never an issue with your privacy.